Your busines tag line here.

Text Box: GSM, Voice, Internet and Smartphone Control

Two White Guys

Life Protection Systems

Independent, Specialist, Discreet, Reliable

Firmware Upgradeable via GPRS or On-Site

The PCS200 Communicator Module supports PCS200 and control panel firmware upgrades through the GPRS network. These upgrades can be conducted remotely or on-site using a PC with an internet connection, WinLoad, and the PCS200 module’s IP address.

Event Notification and System Control via SMS

The PCS200 Communicator Module automatically sends SMS text messages to up to 16 cell phone numbers displaying the nature of the event or trouble. Messages contain event description, site name, date, time, and any associated labels such as area, zone, and serial number.

Event descriptions are pre-defined in the PCS200 module and are available in multiple languages (installer selectable). When in GSM mode, end-users can also arm or disarm the system by sending a text message to the PCS200.

Compatible with Voice Module (GSM only)

It is possible to use the GSM network connection to access all the features provided by the VDMP3 Voice Module. Receive pre-recorded voice messages on up to 8 telephone numbers to report burglary, panic or fire alarms. Also, use the voice-guided menus to arm/disarm, control PGMs, and request system status.

Other Features Control panel communication supervision: The PCS200 will report to the monitoring station should there be a loss of communication with the control panel (GSM mode only).

In-field upgradeable: The PCS200 is in-field firmware upgradeable via GPRS or directly-on site.

Simple installation: Install with a simple 4-wire serial connection up to 1.8m (6ft) from the panel. The module antenna can be installed up to 18m (60ft) from the module using optional antenna extensions.

Optional Accessories

Plug-In Voice Module (VDMP3) - GSM edition only

Antenna extensions: EXT2: 2m/6ft; EXT4: 4m/12ft; EXT7: 7m/24ft; EXT15: 15m/48ft; EXT18: 18m/60ft

IP150 Internet Module

Features

· Report control panel events via IP to the Paradox IPR512 GPRS/IP Monitoring Receiver

· Control and monitor a control panel through an IP network (LAN/WAN/Internet)

· Compatible with Spectra SP series (V2.10 or higher), MG5000/MG5050 (V2.10 or higher) and EVO control panels

· Use NEware or WinLoad to access your system through the Internet

· Receive notification of system alarms via email

· Arm/disarm individual partitions via web browser

· View live status of all zones and partitions (i.e. open/close, arm/disarm, troubles and alarms) via web browser

· Upgrade the firmware of the IP100 using the IP Exploring Tools through the Internet

· DNS service available for dynamic IP address

· Supports SMTP and ESMTP (TLS/SSL not supported)

· Very low bandwidth consumption

· Data sent and received using 128-bit (MD5 and RC4) or 256-bit (AES) data encryption

· Two-way dynamic authentication

· Supports the following languages: English, Spanish, Bulgarian, Czech, French, German, Hungarian, Polish, Portuguese, Romanian, Russian.

For a no obligation survey of your security requirements contact

Andre Louw

Phone: 082 463 5899

Fax: 086 694 7913

E-mail: andre@twowhiteguys.co.za

Two White Guys, Paradox, Paradox Alarms, Paradox Security Systems, Paradox specialist, Paradox expert, Paradox programming, programming, Security, Systems, Alarms, Installers, Alarm Installers, Pretoria, Gauteng, South Africa, EVO, Spectra, Magellan, Digiplex, PMD, DG, REM1, REM2, REM25, REM3, PCS200, PCS250, IP100, IP150, iParadox, Pet, Proof, Friendly, Pet friendly, Pet proof, CCTV, Surveillance, Surveillance Systems, IP Surveillance System, Hik, Hik-Vision, IP Cams, IP Cameras, Camera Installer, IP Camera Installer, Access Control, Biometric Access Control, Biometrics, Gate Motors, Centurion, BPT, Intercoms, Intercom System Estate, Estate Access, Booms, Boom Gates, VOIP, VOIP Intercoms

PCS250 GSM / GPRS Module

Features

· Compact, sleek design

· Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software

· Report via text message (up to 16 cell phone numbers)

· Control panel communication supervision

· End-user can arm or disarm the system by sending a text message (SMS) to the PCS250

· Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)

· Simple installation with 4-wire serial connection

· Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength

· 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)

· Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this

· Report via GSM (CID, SIA)

iParadox - Alarm System Control For iOS

Common features for Lite and Full version

· Compatible with EVO192 (V2.20 or higher), and all MGSP control panels (requires IP100 V5.10 or higher)

· Compatible with iPhone, iPod Touch, iPad and iPad 3G

· View system status (zones and partitions)

· Displays alarm memory

· Displays system troubles

· Functions via Wi-Fi or 3G

· Connects with static or dynamic IP (ParadoxMyHome)

Features for Full version only

· Multi-site support (up to 4): one connection at a time